Product & Service

Jaw Crusher Machine

CathayPhillips Jaw Crushers are configured for primary crushing of even hardest rock. Our Jaw Crushers are crushing without rubbing Minimum dust Oil lubrication, devise having Oil/Grease lubrication system. Our company crushers are designed for long life service with minimum maintenance for hard, tough, abrasive material and overload high capacity. The company all products are also well suited to high efficiency, large capacity size operation.

Jaw Crushers for Manganese Processing

Manganese is an essential part of steel production, being the 4th most consumed metal in terms of tonnages. Over 90% of manganese produced goes into steel alloys, with the market driven by the thriving demand from China and India. Australia is the 2nd largest producer of manganese ore in the world and has the 4th largest ore resources.

Jaw Crusher

Jaw Crusher

The manganese processing workshop is a one day course designed to cover the demands and uses of manganese, the geology and mineralogy of manganese deposits, metallurgical testwork for manganese ores, beneficiation of manganese ores, manganese alloy production and knowledge of current major manganese mining and processing operations.Our jaw crushers are fit for the manganese crushing.

Jaw Crushers Used in Granite Quarrying

Granite quarry is a pit or some open excavation from which granite is obtained. To obtain granite from a quarry either digging, cutting or blasting process is used. This process of obtaining the stone is called quarrying. Once quarrying is done, the processing of granite starts. The four operations that are involved in the processing of granite are as follows:

  • Dressing
  • Cutting/ sawing
  • Surface grinding and polishing and Edge-cutting-trimming

PE Series Jaw Crusher

This series of jaw crusher can reach the crushing ratio of 4-6 and the shape of final product is even. They are widely applied to crush high hardness, mid hardness and soft rocks and ores such as slags, construction materials, marble, etc.PE series Jaw Crusher, including primary crusher and secondary crusher, is mainly used for crushing various ores and bulk materials with compression strength not more than 320Mpa into medium-sized grains.

Jaw Crusher working principle

1. This jaw crusher uses motor as its power. Through the motor’s wheels, the eccentric shaft is driven by the belt and the belt wheel to make the jaw stock move by a regulated track.

2. The angle between the toggie plate and jaw stock will become large as the up of the jaw stock. This will push the movable jaw plate towards the fixed jaw plate,which can realize the multi-crushing of the materials.

3. The angle between the toggie plate and jaw stock will become small as the down of the jaw stock. The movable jaw plate will leave the jaw plate at the pressure of the tension rod and spring ,meanwhile ,the final products will be discharged from the discharging opening.

Model Feed inlet size (mm) Max inlet size (mm) Capacity (t/h) Electric powe r(kw) Overall size LxWxH (mm)
PE150×250 150×250 125 1-5 5.5 875×758×850
PE250×400 400×250 210 5-20 15 1450×1315×1296
PE400×600 600×400 340 16-65 30 1565×1732×1586
PE500×750 750×500 425 45-100 55 1890×1916×1870
PE600×900 900×600 500 50-120 55-75 2305×1840×2298
PE750×1060 1060×750 630 52-180 110 2450×2472×2840
PE900×1200 900×1200 750 140-260 135 3200x3050x2950
PE1000×1200 1000×1200 850 315-342 135 3335x3182x3025
PE1200×1500 1200×1500 1020 400-800 160 4200x3750x3820
PEX250×1000 1000×250 210 16-52 30-37 1530x1992x1380
PEX250×1200 1200×250 210 20-60 37 1900x2192x1430

Note : Any change of technical data about jaw crusher shall not be advised additionally.

Related Solutions

Share |