Product & Service

Spring Cone Crusher

The spring safety system of crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (SDY) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.

Spring Cone Crusher for Cement Production

In the wet process, each raw material is proportioned to meet a desired chemical composition and fed to a rotating ball mill with water. The raw materials are ground to a size where the majority of the materials are less than 75 microns. Materials exiting the mill are called “slurry” and have flowability characteristics. This slurry is pumped to blending tanks and homogenized to insure the chemical composition of the slurry is correct. Following the homogenization process, the slurry is stored in tanks until required.

Spring Cone Crusher

Spring Cone Crusher

In the dry process, each raw material is proportioned to meet a desired chemical composition and fed to either a rotating ball mill or vertical roller mill. The raw materials are dried with waste process gases and ground to a size where the majority of the materials are less than 75 microns. The dry materials exiting either type of mill are called “kiln feed”. The kiln feed is pneumatically blended to insure the chemical composition of the kiln feed is well homogenized and then stored in silos until required.

Spring Cone Crusher Advantage

  • High-effiency: the movable shaft will continuously rotate ,and the materials crushing and the discharging process will take place in turn along the working surface.
  • Convenient operation and maintenance: The machine adopts the secondary vibration isolation technology so that the basic vibration is slight ,which features the convenient operation and low cost.
  • High-quality: The final products feature even size,and cubic shape .And the flexible cone wears evenly relatively.
  • The adoption of dry oil and water, prevents the dust from entering the machine body .This two kinds of sealing ensures the cleaning of the lubrication boiled oil and extends the service life of the slide bearing,which ensures that the machine can obtain a smooth function

Spring Cone Crusher Specification

Model power diameter of cone crusher at big end (mm) max feeding size adjustment range of discharge opening capacity (t/h)
PYB 600 30 Ф600 65 12-25 20-40
PYD Ф600 35 2-13 12-23
PYB 900 55 Ф900 115 15-50 60-105
PYZ Ф900 60 5-20 50-90
PYD Ф900 50 3-13 15-50
PYB 1200 130 Ф1200 145 20-50 110-168
PYZ Ф1200 100 8-25 42-135
PYD Ф1200 50 3-15 18-105
PYB 1750 160 Ф1750 215 25-50 280-480
PYZ Ф1750 185 10-30 115-320
PYD Ф1750 85 5-15 75-230
PYB 2200 260 280 Ф2200 300 30-60 590-1000
PYZ Ф2200 230 10-30 200-580
PYD Ф2200 100 5-15 125-350

Note : Any change of technical data about spring cone crusher shall not be advised additionally.

Related Solutions

Share |